www.panduit.com electrical performance: meets channel and component requirements of ansi/tia/eia-568-b.2-1 category 6 and iso 11801 2nd edition class e ratified standards at swept frequencies up to 250 mhz fcc compliance: meets ansi/tia-968-a; contacts plated with 50 microinches of gold for superior performance iec compliance: meets iec 60603-7 ul rated: meets ul 1863 poe compliance: meets draft requirements of ieee 802.3at for poe plus key features and benefits applications technical information specifications category 6/class e utp interconnect patch cords shall be constructed of 24 awg twisted pair stranded copper cable with the addition of a 26 awg ninth conductor. the patch cords shall be terminated with a shielded modular plug on one end, with a nine wire modular plug on the opposite end. patch cords shall be used in conjunction with intelligent patch panels and shall be used exclusively for interconnect architectures. switch/server communicates connection status between switch/server port detection with p an v iew iq ? patch panels without network protocol 100% performance tested assurance that each patch cord will deliver the critical electrical performance requirements integral pair manager optimizes performance and consistency by reducing untwist at the plug slender strain relief boot provides easy access in high-density applications patented tangle free latch prevents snags and provides easy release, saving time on frequent moves, adds, and changes ninth conductor continuity provides continuity through the patch cord enabling the p an v iew iq ? system to monitor connectivity without interfering with ethernet performance variety of cable colors meets individual length and color-coding requirements for and lengths greater system flexibility the p an v iew iq ? ( pviq ? ) system is a next-generation physical infrastructure management solution that utilizes hardware and software to provide real-time monitoring of patch field connectivity. pviq ? system maps and monitors both the physical layer and network resources to enable improved infrastructure visibility and to reduce network operational costs. pviq ? system provides automated network documentation and maintenance procedures for the physical layer, offering improved reliability and security while increasing overall network management efficiency. p an v iew iq ? patch panels support tiered installations to provide customer with the flexibility of installing passive connectivity that may be upgraded to fully managed at a future time. p an v iew iq ? interconnect patch cords enable intelligent physical infrastructure management for interconnect architectures by verifying switch port connection and communicating with the system software, to allow improved network visibility. interconnect patch cords can reduce patch panel requirements by 50% over cross-connect designs, reducing installation and deployment costs. p an v iew iq ? interconnect patch cords p an v iew iq ? system p an v iew iq ? interconnect patch cords ? cm rated foot lengths: pvq-biu6c3bu* meter lengths: pvq-biu6c1mbu** p an v iew iq ? interconnect patch cords ? lszh rated meter lengths: pvq-biu6l1mbu^ p an v iew iq ? patch panels modular, intelligent, blank 24-port flat unshielded: pvq-miqpu24 angled unshielded: pvq-miqapu24 flat shielded: PVQ-MIQPS24 angled shielded: pvq-miqaps24 p hysical i nfrastructure m anager ? (pim ? ) software suite software cd with manual: pims-media endpoint license ? 100 intelligent lease: pims-100el endpoint license ? 1000 intelligent lease: pims-1kel maintenance agreement, basic 1 year: pims-ma-b1 p an v iew iq ? hardware components panel manager (pm): pvq-pm expansion module (em): pvq-em note: pm requires p an v iew iq ? power supply (not included). p an v iew iq ? power supply 12 volt power supply (north america): pvq-ps12vdc-s note: power supplies are also available for europe (-e) and the u.k (-u). *for standard lengths other than 3 feet (5, 7, 10, 14 or 20) change the length designation in part number to the desired length. for standard cable colors other than bu (blue) replace suffix bu with gr (green) at the end of the part number. for example, the part number for a green 10-foot cm patch cord is pvq-biu6c10gr. **for standard lengths other than 1 meter (2, 3, 5, or 10) change the length designation in part number to the desired length. for standard cable colors other than bu (blue) replace suffix bu with gr (green) at the end of the part number. for example, the part number for a green 10-meter cm patch cord is pvq-biu6c10mgr. ^for standard lengths other than 1 meter (2, 3, 5, or 10) change the length designation in part number to the desired length. for standard cable colors other than bu (blue), replace suffix bu with wh (white) at the end of the part number. for example, the part number for a white 10-meter, lszh patch cord is pvq-biu6l10mwh. specification sheet
?2009 panduit corp. all rights reserved. ww-pvsp32 6/2009 p an v iew iq ? interconnect patch cords contact customer service by email: cs@panduit.com or by phone: 800-777-3300 and reference pvsp32 visit us at www.panduit.com for more information worldwide subsidiaries and sales offices for a copy of panduit product warranties, log on to www.panduit.com/warranty panduit canada markham, ontario cs-cdn@panduit.com phone: 800.777.3300 panduit europe ltd. london, uk cs-emea@panduit.com phone: 44.20.8601.7200 panduit japan tokyo, japan cs-japan@panduit.com phone: 81.3.6863.6000 panduit singapore pte. ltd. republic of singapore cs-ap@panduit.com phone: 65.6305.7575 panduit australia pty. ltd. victoria, australia cs-aus@panduit.com phone: 61.3.9794.9020 panduit latin america jalisco, mexico cs-la@panduit.com phone: 52.333.777.6000 t568b wiring scheme plug position cable wire 1 white/orange 2 orange 3 white/green 4 blue 5 white/blue 6 green 7 white/brown 8 brown twist tie twist tie identification label connection for 9th wire plug position 2.000.50 strain relief boot category 6 shielded plug
|
